Security Fencing / Gates

British Steel, South Works

Steel Palisade Security Fencing Installation at British Steel, South Works, Darlington

Questorwell Construction | Darlington

British Steel, South Works, Darlington — project photo 1

01 / Overview

Project Overview

Strike Fencing Contractors were appointed by Questorwell Construction to enhance site security at the British Steel South Works in Darlington. Following a history of unauthorised access, the objective was to renew and secure the entire perimeter to protect warehouse operations. Our team provided a comprehensive installation service, delivering a robust physical barrier that addresses the site's specific security requirements. This project demonstrates our capability in deploying high-security fencing systems within industrial environments.

02 / Scope

Project Details & Scope of Works

The project involved the installation of 140 metres of 2.4-metre high triple-pointed steel palisade fencing, featuring cranked brackets and integrated razor wire. Additionally, we installed 40 metres of 3-metre high steel palisade fencing equipped with razor wire. The scope also included the installation of various 2.4-metre and 3-metre high steel palisade sections, complemented by access gates specifically positioned to protect warehouse doors from intruders. All installed fencing utilised triple-pointed W-section steel palisade, manufactured in accordance with BS 1722 Part 12 and galvanised to BS EN ISO 1461. The razor wire specification comprised a BTO-22 blade pattern, featuring a single loop of hot-dip galvanised steel clipped to a 2.5mm core wire with 0.5mm thick blades.

03 / Design

Design Input & Specialist Procurement

Strike Fencing Contractors sourced all materials and suppliers required to fulfil the project specification.

04 / Specification

Technical Specifications

  • 2.4m and 3m high triple pointed w-section steel palisade BS 1722 Part 12 Galvanised to BSEN ISO1461
  • Razor wire - BTO-22 blade pattern: a single loop of hot-dip galvanised steel clipped onto a 2.5mm (±0.1mm) core wire, with 0.5mm (±0.05mm) thick blades punched from 0.42mm plate.

05 / Delivery

Installation Challenges & Solutions

The primary installation challenge involved the interface between the fencing and the existing industrial reinforced concrete ground conditions. To accommodate the perimeter topography, the installation required a combination of dig-in and bolt-down post methods to ensure structural stability. Furthermore, the handling and installation of razor wire presented significant safety risks. Our team mitigated these risks by utilising their experience in handling high-security materials and ensuring that correct Personal Protective Equipment (PPE) was maintained at all times throughout the works.

06 / Outcome

Completed Works & Project Outcomes

The project was successfully completed, securing the site perimeter against unauthorised access in accordance with the specified requirements.

Gallery

Project Photography

Related Projects

M&S Foodhall, Cannock, Cannock — project photo 1

Security Fencing / Architectural Screening / Specialist Installations

M&S Foodhall, Cannock

Cannock

The new M&S Foodhall in Cannock needed several kinds of fencing and protection. The site perimeter, the delivery area and the car park each had different requirements, and the customer-facing areas needed to look good.

View Project
Double-sided featheredge fencing on steel H-section posts beside the lower-level pedestrian walkway at Waterhouse Gardens, Manchester

Architectural Screening / Railings

Waterhouse Gardens, Manchester

Manchester

Specialist aluminium screening, bespoke podium railings & timber perimeter fencing installed for Wright Landscapes at Waterhouse Gardens, Manchester.

View Project

Cheshire | Manchester | North West

Planning a similar project?

From an early discussion about product selection to a defined tender package, we'd be pleased to consider your requirements.

Discuss a project